|
|
 Product Catalog |
|
| Product Catalog / Nozzle Accessories / Nozzle Inserts |
 |
|
|
|
Carbide Inserts
|
|
Part Number: See Below
|
|
For straight water stream and long service life in most inserted
nozzles, use combined stainless steel/carbide nozzle inserts.
|
|
A. BODY - Constructed of hardened stainless steel for long service life. |
B. CARBIDE - Precision construction to accurately control flow rates and pressure. Recessed to protect against damage.
|
|
C. FLOW STRAIGHTENER - An internal stainless steel guide, stabilizing liquid turbulence to provide
maximum spray integrity and impact. (Optional) |
|
|
|
|
Part No. SC12
1/4" NF 1/8" Internal Hex
Length 0.4" |
Part No. C12
1/4" NF 1/4" Hex
Length 0.45" |
|
Use in small nozzles and rotating blasters. Carbide available
in 0.1mm (0.004") increments from 0.6mm through 2.5mm.
Flow straighteners not available in these inserts.
Carbide: 4mm dia x 6.5mm long |
|
|
|
|
Part No. C13
3/8" NF 3/8" Hex
Length 0.6" |
Part No. C11
1/8" NPT 3/8" Hex
Length 0.58 |
|
Use in most Shamrock
standard inserted nozzles
(Sand, Grease, Ultimate Penetrators,Grenades, Cobia,
Skid Nozzles, Boat, Dolphin, and Finned Fantail.)
Carbide available in 0.1mm (0.004")
increments from 0.7mm through
3.6mm.
Flow straighteners available.
|
Use in Shamrock high pressure
nozzles such as the Shamrock-et® and specialty tools.
Carbide available in 0.1mm
(0.004") increments from
0.7mm through 3.6mm.
|
|
|
|
|
Part No. C17
1/4" NPT 9/16" Hex
Length 0.93" |
Part No. C17HH
1/4" NPT 9/16" Hex
Length 2" |
|
May be used in
standard carwash
guns for 0° strong, straight
water stream.
Carbide and Flow
Straightener standard. |
Use in nozzles for
hydro excavating
in industrial applications
requiring long, straight
water jets.
Flow Straightener
standard.
|
|
Carbide available in 0.1mm (0.004") increments
0.7mm through 3.6mm.
When ordering, specify flow (gpm)
and pressure (psi).
Available up to 15,000 psi. |
When ordering specify flow (gpm) and pressure (psi).
Avaiable up to 15000 psi.
Carbide available in 0.1mm (0.004") increments,
00.7mm through 3.6mm.
|
|
|
|
|
|
|
|
|
|
| |
 |
Home | Search | Contacts | Product Catalog | Media Gallery | Service | Resources © Copyright 2012, Shamrock Pipe Tools, Inc.. All rights reserved.
|
Guides & Tips
